Parts Description; Technical Specifications; Safety Instructions - Parkside PTMI 180 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

z Parts description
Carrying strap
1
Control button
2
Control wheel
3
Earthing clamp
4
Electrode holder
5
z Technical Specifications
Mains connection:
Max. welding current and the appropriate standardised
operating voltage:
Rated value of the mains voltage:
Greatest rated value of the mains power:
Maximum effective input current:
Rated value of the no-load voltage:
Protection class:
Weight:
Material thicknesses which can be welded:
z Safety instructions
Please read the operating instructions with care and observe the
notes described. Familiarise yourself with the device, its proper use
and the safety instructions using these operating instructions.
The rating plate contains all technical data of this welder; please
learn about the technical features of this device.
„
children. There is a risk of suffocation!
Repairs or/and maintenance work must only be carried out by
„
qualified electricians.
Only use the welding cables provided in the scope of delivery.
„
During operation, the device should not be positioned directly
„
against the wall, should not be covered or jammed between other
devices so that sufficient air can always be absorbed through the
ventilation slats. Make sure that the device is correctly connected
to the mains voltage. Avoid any form of tensile stress of the power
Keep the packaging material away from small
TIG torch
6
2 MMA welding electrodes (2 x 2.5 mm)
7
1 TIG electrode 1.6 mm
Mains cable
8
ON/OFF switch
9
230 V ~ 50 Hz (alternating current)
20 A/18.8 V – 180 A/25.2 V
U :230 V
1
I : 32.8 A
1max
I : 13.4 A
1eff
U : 70 V
0
IP21S
approx. 3 kg
max. 3.0 mm
GB/IE/CY 7