Parkside PSGS 120 A1 Bedienungs- Und Sicherheitshinweise Seite 48

All flammable substances and/
or materials are removed from
the work station and its imme-
diate surrounding.
Ensure the work station is
„
ventilated.
Do not weld on containers,
„
vessels or tubes that contain or
contained flammable liquids or
gases.
form of direct contact with the
welding current circuit. The
open circuit voltage between
the electrode holder and
earth terminal can be danger-
ous, there is a risk of electric
shock.
Do not store the device in a
„
damp or wet environment or
in the rain. Protection rating
IP21S is applicable in this
case.
Protect your eyes using the
„
appropriate protective glasses
(DIN level 9-10), which are
fastened to the supplied weld-
ing mask. Wear gloves and
dry protective clothing that are
free of oil and grease to pro-
tect the skin from exposure to
ultraviolet radiation of the arc.
Avoid any
the welding power source to
defrost pipes.
Please note:
The light radiation emitted by
„
the electric arc can damage
eyes and cause burns to the
skin.
Arc welding creates sparks
„
and drops of melted metal.
The welded workpiece starts to
glow and remains hot for a rel-
atively long period. Therefore,
do not touch the workpiece
with bare hands.
Arc welding can cause
„
vapours to be release that
may be hazardous to health.
Be careful not to inhale these
vapours.
Protect yourself from the
„
harmful effects of the electric
arc and keep people that are
not involved in the work away
from the arc maintaining a
distance of at least 2 m.
ATTENTION!
During the operation of the
„
welding device, other consum-
ers may experience problems
with the voltage supply
depending on the network
Safety instructions
Do not use
GB/IE 39