Safety; Safety Instructions (Warning Notes); Classification Of Hazards - Optimum OPTIdrill B13 basic Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
1

Safety

Glossary of symbols

provides further instructions

calls on you to act

listings
This part of the operating instructions

explains the meaning and use of the warning notes included in these operating instructions,

defines the intended use of the drilling machine,

points out the dangers that might arise for you or others if these instructions are not
observed,

informs you about how to avoid dangers.
In addition to these operation instructions, please observe

the applicable laws and regulations,

the statutory provisions for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the drilling
machine.
Always keep this documentation close to the drilling machine.
INFORMATION
If you are unable to rectify an issue using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt
email: info@optimum-maschinen.de
1.1

Safety instructions (warning notes)

1.1.1

Classification of hazards

We classify the safety warnings into different categories. The table below gives an overview of
the classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Alarm expression
DANGER!
WARNING!
CAUTION!
ATTENTION!
GB B13 basic | B14 basic | B16 basic
Page 34
®
Impending danger that will cause serious injury or death to people.
A danger that can cause serious injury or death.
A danger or unsafe procedure that can cause personal injury or damage to
property.
Situation that could cause damage to the drilling machine and product, as
well as other types of damage.
No risk of injury to persons.
Translation of the original instructions
Definition / consequence
Version 1.0 dated 2019-01-08