Scales; Display Values Of Scales; Weighing Ingredients; Changing The Display Units Of The Scales - Bosch MUM5X-Serie Gebrauchsanleitung

Fitting drive cover
Align the protective cover for the
1.
drive 2 with the marking
wards the back, position and press
in place firmly.
→ Fig.
24
Position the protective cover for
2.
the drive 3 and press in place
firmly.
→ Fig.
25
Markings and
up.
Note: Always close unused drives
with the protective covers.

Scales

Scales
Your appliance is equipped with a set
Scales
of scales. You can weigh ingredients
individually.
The base unit has 4 weight sensors
in its feet.
The following factors can falsify the
measuring result:
¡ Feet not standing on the work sur-
face properly
¡ Work surface vibrating
¡ Objects underneath the base unit
¡ Ingredient quantities less than 5 g
or 0.01 lb
¡ Base unit slipped
¡ Base unit touched
¡ Objects on the base unit

Display values of scales

Observe the following values when
using the scales.
Display unit in grams
Display range
Display steps
Display unit in pounds
Display range
to-
must match
-990 g to 5000 g
5 g
-2.20 lb to 11.00 lb
Display steps
Tip: You can change the display
units of the scales at any time.
→ "Changing the display units of the
scales", Page 45

Weighing ingredients

Requirements
¡ The bowl is inserted or an access-
ory is fitted.
¡ The rotary switch is set to
¡ The mains plug is inserted.
Press and do not touch the ap-
1.
pliance again.
a The scales will be calibrated.
a The display shows "- - - -".
Wait for calibration to finish.
2.
a The display shows "0 g" or
"0.00 lb".
Add the required ingredient.
3.
a The display shows the weight.
To weigh further ingredients, select
4.
one of the following options:
Add further ingredients and read
‒
off the total weight.
Press and wait until the dis-
‒
play shows "0 g" or "0.00 lb".
To switch off the scales, press
5.
start processing.
Tip: Also use the scales together
with the accessory. Weigh the in-
gredients directly when adding them,
e.g. to the blender attachment or the
ice maker.
Note: The scales switch off automat-
ically after approx. 3 minutes of in-
activity.
Changing the display units of
the scales
Requirements
¡ The rotary switch is set to
¡ The scales are switched on.
Scales en
0.01 lb
⁠ .
⁠ .
or
45