Test Methods; General Data - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

2.3.6 Test Methods

2.3.7 General Data

Downloaded from www.Manualslib.com
Test method
Plate holder test
Installed bag test
Ambient conditions
Ambient temperature:
Noise level:
Humidity:
The unit should be set up under ambient conditions that produce no negative
effects during operation and processing, e.g. from contaminated airflows,
metallic dust or fluids from leaks, condensation, aerosols or widely changing
temperature conditions.
manuals search engine
Type of bags to be tested
Adapted for testing of
2D or 3D bags restrained
in a plate holder (e.g. FlexAct
for 2D bags), via a sterilizing
grade vent filter, with or
without additional tubings.
The test can also be performed
without any sterilizing grade
vent filter.
Adapted for testing of
3 dimensional bags (e.g. STR),
installed in an appropriate
holder (e.g. STR holder), via
the sterilizing grade vent filter.
+5 up to +35°C
< 70 dB (A)
95% at 25°C
Overview and Proper Use
Test pressure
Min 3 mbar |
Max 300 mbar
Min 3 mbar | Max 50 mbar
9