Test Methods; Programming Tests (F2 - Main Menu) - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

7.3.2 Test Methods

7.3.3 Programming Tests
(F2 – Main Menu)
Fig. 7-5 | Main Menu
30 Operation
Downloaded from www.Manualslib.com
With the Sartocheck
method. This greatly simplifies programming the data for a test, since only the
parameters that are relevant for the selected test are displayed.
You can select any of the following test methods:
Test methods
1 Diffusion test
2 Bubble point test (Standard and Customer specific)
3 Diffusion and bubble point test
4 Water intrusion test
5 Pressure drop test
6 Multipoint diffusion test (Standard and Customer specific)
7 Volume measurement
8 Plate holder test
9 Installed bag test
System Venting
At the end of each test, after a power failure or after switching off the unit during
a test, the system is automatically vented.
The Sartocheck
Nevertheless it is possible to program filter tests due to the fact that additional Filter
tester MultiUnits may be connected to the Bag tester. The test parameters for the
individual tests are entered and selected on Sartocheck
the keypad or the touch screen. The Main Menu is the starting point for program-
ming. The following example uses a diffusion test to illustrate how to program data
for tests and run test sequences (F2 – Main Menu).
The programming and test sequences are identical for the other test types.
Before we start programming, we would like to explain a few important keys
and | or touch commands.
The Sartocheck
of the screen. These buttons always have the same functions:
Main Menu:
Page Up:
Page Down:
List Up:
List Down:
Enter:
manuals search engine
®
4 plus Bag tester, you can directly select a particular test
® 4 plus Bag tester may only perform leak testing of bags.
®
displays are set up with yellow buttons located on the right side
The program jumps back to the Main Menu (see Fig. 7-5)
the program scrolls to the previous page of the screen
the program scrolls to the next page of the screen
Whenever a list is displayed on the screen, use LIST UP
to scroll up the list
Whenever a list is displayed on the screen, use LIST DOWN
to scroll down the list
Confirms the selected function, action or entry.
Following confirmation, the yellow key turns gray
®
4 plus Bag tester by using