Hardware Configuration (F2-Service) - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

7.19.2 Software Configuration
(F2-Service)
Fig. 7-72 | Service Menu: Software configuration
Fig. 7-73 | Service Menu: Software configuration
Fig. 7-74 | Service Menu: Software configuration
Fig. 7-74b | Service Menu: Software configuration
(continued)
58 Operation
Downloaded from www.Manualslib.com
With the software configuration you can define:
Language
Date format
Date
Time
Reference
Pressure
Units of measure
Pressure
WIT unit
Temperature
All units of measure can be reset to Sartorius Stedim Biotech values using F1.
Pressure:
WIT unit:
Temperature:
Record data
For each type of test (Diffusion, Bubble Point, etc.) you can define your basic record
data. These defined parameters will then apply to all test programs. Go from the
Service Menu – Software Configuration – Record data to the overview screen of
the test type. Now select the desired test type, e.g. Diffusion or Bubble Point Test.
You are immediately taken to the list of the record fields.
Starting with company, building and department, you can now define individual
record fields by placing a checkmark or cancelling in the "Selection" field.
manuals search engine
German
English
French
Spanish
Italian
dd.mm.yyyy
dd/mm/yyyy
dd-mm-yyyy
mm/dd/yyyy
yyyy/mm/dd
yyyy.mm.dd
as defined above
hh.mm.ss
1000 mbar (abs)
1013.25 mbar (abs)
mbar
psi
hPa
ml/10min
ml/min
°C
°F
K
mbar
ml/10min
°C