Connections; Front Panel And Back Panel; Left And Right Panels - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

5.4 Connections

5.4.1 Front Panel and Back Panel

1 2 3 4
Fig. 5-2 | Front Panel
1
Fig. 5-3 | Back Panel

5.4.2 Left and Right Panels

®
Sartocheck
1
Fig. 5-4 | Left panel
Downloaded from www.Manualslib.com
5
2
3
4
4 plus Bag tester
2 3 4
manuals search engine
Before starting up the unit; make sure that the unit is stable and secure.
Check all pneumatic and electrical connections on the unit.
The following displays are located on the front panel:
1 Standby
Is lit up when Sartocheck ® 4 plus Bag tester is ready for operations, but not
currently running any test program. (Blinking LED)
2 Ready
Lights up when the result of the filter test is ready. (LED lit)
3 Running
Is lit up when a test is currently running. (LED lit)
4 Error
Lights up when the test unit has identified an error and cancelled the test.
(LED lit)
The following connection ports are located on the back panel:
1 Housing ventilator
The unit is equipped with a ventilator that ensures that Sartocheck
Bag tester is kept at a constant temperature.
2 Serial port MU (Management Unit)
This port is used for connecting accessories (e.g. barcode scanner).
3 AC adapter
Power plug for connecting the power cord to mains supply.
4 Fuses
Fine-wire fuses between unit and mains supply.
5 Network Connection
RJ45
Located on the left panel:
1 Main power switch
Switch on the power with the main power switch.
2 SD Card Reader
The SD card reader is designed for standard SD cards for inputting and
storing data.
3 Serial port TU (test unit)
Port for connecting additional test units (Multiunits).
4 PLC Port
Port for connecting PLC controller signal input and output.
®
4 plus
Installation 17