Herunterladen Inhalt Inhalt Diese Seite drucken

Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung Seite 55

Bag tester / bag tester multiunit
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Fig. 7-65 | Network connection
Fig. 7-66 | FTP Server
Downloaded from
www.Manualslib.com
Selecting F1 from the Network settings menu brings up the Network connection
menu. Within this menu is where the IP address of the Sartocheck
is identified as well as the addresses of the server and gateway. Explanations of the
parameters follow:
F1:
F2:
F3:
F4:
F5:
Selecting F2 from the Network settings menu brings up the FTP server menu.
Within this menu is where the IP address and port of the FTP server are set, as well as
the user name and password that the Sartocheck
accessing the FTP server. Explanations of the parameters follow:
F1:
F2:
F3:
F4:
F5:
manuals search engine
Address allocation
There are two (2) choices for this item
Automatic: This is chosen if a dynamic address assignment via DHCP is made.
If this option is chosen, all subsequent fields will be grayed out, as the DHCP
server will automatically provide the parameters.
Manual: If a static address assignment is being made, then this option should
be chosen. At in minimum the SC4 plus IP address and the subnet mask must
be entered.
SC4 plus IP address
If a static address assignment is selected (manual), the IP address of the
®
Sartocheck
4 plus Bag tester is entered here
Subnet mask
Use the information from the subnetwork screen to define the network type
DNS server address
If a static address assignment is selected (manual), enter the IP address of
the DNS server potentially existing on the network.
This is required for the resolution of addresses such as ftp.company.com
Gateway
A gateway address is needed if the FTP server is located in a network other
®
than the Sartocheck
4 plus Bag tester.
Server address
Enter the FTP server address as the numerical IP address (xxx.xxx.xxx.xxx) or,
if a DNS server is available, as a name such as ftp.customernet.com
Port
Enter the FTP port (typically port 21) to which the request should be made for
the connection setup
User name
Enter the user name of the user setup on the FTP server
Password
Enter the applicable password
Timeout
Enter the time out (or wait time) for responses from the FTP server
®
4 plus Bag tester
®
4 plus Bag tester should use when
Operation
55

Werbung

Kapitel

Inhaltsverzeichnis
loading

Verwandte Produkte für Sartorius Stedim Biotech Sartocheck 4 plus

Inhaltsverzeichnis