Multiunit; Connections With Internal Pressure Sensor; Pneumatic Connections - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

1 2 3
Fig. 5-5 | Right panel
5.4.3 Left and Right Panels
®
Sartocheck 4 Bag tester MultiUnit

5.5 Pneumatic Connections

18 Installation
Downloaded from www.Manualslib.com
Located on the right panel:
1 Ext. sensors
Port for connecting an external temperature sensor.
2 Ext. valves
Port for connecting external valves.
3 Venting 3
Quick connector for Venting 3.
4 Venting 2
4 5 6 7
Quick connector for Venting 2.
5 OUT
Quick connector for test tubing.
6 Venting 1
Quick connector for Venting 1.
7 IN
Quick connector for compressed air supply.
Fig. 5-6 | Left panel
Sartocheck
between its' outlet and the bag to be tested. The set-ups for both the Sartocheck
plus Bag tester and the Sartocheck
in Fig. 5-8, Fig. 5-9 and Fig. 5-10.
Do not connect Sartocheck
ture systems! Wait until the whole system is at room pressure and temperature!
manuals search engine
Fig. 5-7 | Right panel
®
4 plus Bag tester can be operated with a sterilizing grade filter
®
4 plus Bag tester MultiUnit, are illustrated
®
4 plus Bag tester to pressurized or high tempera-
®
4