Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung Seite 44

Fig. 7-35 | Program database: Load test program
Fig. 7-36 | Test program:
Assign memory location number
Fig. 7-37 | Program database:
Program memory location
Fig. 7-38 | Test program:
Assign memory location number
44 Operation
Downloaded from www.Manualslib.com
The data on the SD card are uploaded and displayed in a program selection list.
Here you can select the programs as described (see Fig. 7-28: Program databases:
Internal memory).
After you have selected the program or the program block, you will be prompted
to assign a memory location number and| or memory location to this program or
program block in Sartocheck
The test program and |or the test program section will be uploaded and saved
to the selected internal program memory location.
If the memory location number you have selected is already assigned, a warning
will be displayed. With PAGE UP, you can select a new program memory location.
By pressing Enter, the program data already stored in the internal memory will be
overwritten with the new data.
Loading the test program from the network (F3) follows the same procedure as
loading from an SD card (F2).
manuals search engine
®
4 plus.