Fig. 7-10 | Test program: Record data 1
Fig. 7-11 | Test program: Record data 2
Fig. 7-12 | Test program: Start
Fig. 7-13 | Test unit selection
Downloaded from
www.Manualslib.com
Enter record data 1 (up to 32 characters per field)
Company:
Building:
Department:
Manufact. site:
Product:
Product lot:
Filter:
Filter lot:
Locks
After entering with the Shift + F keys, the programmer can lock the data
to prevent any changes. The dialog boxes are then highlighted in gray.
The user can no longer change the entered data. The relevant record data are
entered in the menu "Test program: Record data 1."
Entry of record data 2
Filter line:
Housing:
Wetting medium:
Test gas:
Water quality:
Comment:
Comment 2:
Comment 3:
Start the Test Program
Save:
After confirmation, the data are saved
The menu "Test program: Start" lists the options for that test start.
Once the programming is finished, the test can be started.
Choose the test unit on which to perform the integrity test.
Only test units that are currently available will be selectable.
manuals search engine
Company name
Building name; house number
Identification of the department
Production sector
Product name
Batch number
Filter size
Number of the filter batch
Name of filter line
Type of housing
Type of wetting medium
Type of test gas
Data on water quality
Name of operational process
Enter test-relevant remarks
Enter test-relevant remarks
Operation
33