Troubleshooting; Exchanging The Fine-Wire Fuses - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

9. Troubleshooting

9.1 Troubleshooting
9.1.1 Exchanging the
Fine-wire Fuses
Downloaded from www.Manualslib.com
9. Troubleshooting
The work and instructions for "Troubleshooting" described in these operating
instructions are explained in such a way that they can be understood and
carried out by trained workers and qualified technicians (see Definition in
Chapter 3.3 "Safety Precautions") in
– Electrical |Electronics
– Mechanical |Maintenance
This personnel must be provided with the appropriate tools and testing devices.
In particular-, when maintenance and repair work is being carried out, the shutdown
procedures (see Chapter 4.4) must be carried out under all circumstances. If the
measures listed do not succeed, please contact the Sartorius Stedim Biotech GmbH.
Whenever errors occur, they appear on the display. Proceed as prompted by the menu
guidance and observe the following instructions:
The current procedure continues after confirmation. The user is prompted with the
following instructions:
– The current procedure has been stopped. A user decision is required and must
– The current procedure has been cancelled. The user receives the error code "Enter
If it becomes necessary to contact Sartorius Stedim Biotech Service,
please have the following information ready:
– Serial number
– Version
– The four-digit error code
manuals search engine
be confirmed before Sartocheck
procedure.
elimination note" or the prompt to inform Sartorius Stedim Biotech Service.
(see the back panel of Sartocheck
display)
(see header display)
®
4 plus continues to carry out or cancels the
®
4 plus Bag tester test print out with header
Troubleshooting 69