Maintenance | Servicing; Maintenance; Sartorius Stedim Biotech Service Menu; Cleaning - Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung

8. Maintenance |Servicing

8.1 Maintenance

8.1.1 Sartorius Stedim Biotech
Service Menu

8.2 Cleaning

68

Maintenance | Servicing

Downloaded from www.Manualslib.com
8. Maintenance | Servicing
Maintenance Intervals
t
Every 6-12 months
To ensure that your Sartocheck
quality, consistent service, you can have it regularly calibrated. This is a service
we offer as part of a maintenance agreement. If the Sartocheck
should show any unusual inconsistencies during an integrity test sequence, please
notify your local Sartorius Stedim Biotech office or directly contact the corporate
headquarters in Germany:
Sartorius Stedim Biotech GmbH
Service |FT
August-Spindler-Strasse 11
37079 Goettingen, Germany
Phone +49.551.308.0
Fax +49.551.308.3289
www.sartorius-stedim.com
Whenever you need to contact our technical customer service or require spare parts,
please contact your Sartorius Stedim Biotech representative or Sartorius Stedim Bio-
tech GmbH directly with the name and identification of the unit.
Before exchanging the fine-wire fuses, turn off the unit and unplug it
from the wall outlet (mains supply).
Fuses:
Two 250 V/16 A time-delay fuses compliant with DIN 41662 IEC 60127-2/III or
IEC 127-3.
Remove the fuse socket (see page 13) and pull out the two fuses. Install the new
fuses back in the connection block. Now plug the unit back into the wall outlet.
The Service Menu contains all internal operating functions, limits and test abort
parameters. Major errors in measurement can occur if they are changed incorrectly.
Therefore, only a Sartorius Stedim Biotech service technician or a specially trained
member of your staff should change the parameters in the Service Menu.
Service Menu instructions are only given to specifically named and authorized
Service technicians who must confirm their receipt.
For cleaning, use a wet cloth and wipe afterwards with a dry cloth. Make sure
that no humidity or moisture enters the device. Do not use solvents!
Follow the shutdown procedure (see Chapter 4.4) before carrying out
maintenance, cleaning and repair work!
manuals search engine
®
4 plus Bag tester will give you many years of high-
®
4 plus Bag tester