Sartorius Stedim Biotech Sartocheck 4 plus Betriebsanleitung Seite 48

Fig. 7-48 | Results database: Internal test results
Fig. 7-49 | Results database: Internal test results 1
Fig. 7-50 | Results database: Save
48 Operation
Downloaded from www.Manualslib.com
With F1, all test results from the internal memory are displayed in a selection list.
The list is structured as follows:
The first column shows whether the result has already been saved. The saved program
displays a diskette symbol. In the following columns, the current memory location
number, the date of creation with time, serial number of your Sartocheck
tester, the integrity test type as well as the individual name of the test program are
displayed. The last column provides information about the test evaluation:
OK: Test passed
NN: Test cancelled, no result
F: Test not passed, line is displayed in red.
You can highlight the results by entering the list number or using the touch screen.
Above the results list there is an entry line "From ### to ###". In this line, you can
highlight the test results block.
Confirm your selection by pressing enter.
The highlighting is cancelled by selecting "Remove highlighting."
Above the function keys F1-F5, the highlighted test result is displayed.
In the highlighted test results blocks, you can scroll through the selection list
with LIST UP|DOWN. The following functions can be selected:
F1: View
The test results are displayed
F2: Printout
Prints out the test results on the internal printer
F3: Save to SD card
Saves the test results to SD card
F4: Save to network
Saves the test results to the network
F5: Delete
Deletes the test results
In the menu Results database: Save to SD card and save to network
The highlighted result will be saved to the SD card or the network.
When saving the results, Sartocheck
This file name is uniquely assigned. It is comprised of the following:
yymmdd_hhmm_04WIT12345678#.s4r
yymmdd:
hhmm:
04:
WIT:
12345678:
#:
manuals search engine
®
4 plus Bag tester establishes a file name.
Year, month, day in which the test was started
Hour, minute at which the test was started
Memory location number of the test program
Test type
Serial number of the Sartocheck
Counting number (It is theoretically possible that a test is started
twice in one minute, if the first test was cancelled immediately after
it was started)
®
4 plus Bag
®
4 plus Bag tester