Uploading In The Test Program From The Sd Card (F2 - Program Database) - Sartorius Stedim Biotech Sartocheck 3 plus Betriebsanleitung

Fig. 7-29 | Program database:
Load test program
Fig. 7-30 | Program database:
Load test program
Fig. 7-31 | Test program:
Assign memory location number
Fig. 7-32 | Program database:
Program space
32

7.13.2 Uploading in the Test Program from the SD Card (F2 - Program Database)

Save SD card archived test programs back into the Sartocheck
base. To do so, insert an SD card into the drive of the Sartocheck
PAGE DOWN.
The data on the SD card are uploaded and displayed in a program selection list.
Here you can select the programs as described (see Fig. 7-27: Program databases:
Internal memory).
After you have selected the program or the program block, you will be prompted
to assign a memory location number and|or memory location to this program or
program block in Sartocheck
The test program and|or the test program section will be uploaded and saved
to the selected internal program memory location.
®
3 plus.
® 3 plus program data-
® 3 plus and press