ZAPTEC Pro Installationshandbuch Seite 9

ZAPTEC Pro
In the box
A Front cover
– ZM000185
B
Charging station – ZM000437
Supplied with the back plate
Junction box
F
Back plate with junction box
– ZM000438
Tool which is required for installation
x 1
T10
T10 Torx screwdriver or bit
C
Cable entry
x 1
4 mm
4mm Unbrako screwdriver
or bit
x 1
SmartKey – ZM000278
x 1
User manual – ZM000325
D
x 1
E Unique PIN code to configure
the device in the ZAPTEC app
x 1
Small sealing cone (10-16mm) – ZM000180
G
Dept. Technical reference Created by Approved by
Fredrik Ostrem 01.08.2017
Document type Document status
x 1
Title DWG No.
ZCS_Sealing_Cone_8mm_v1
Rev. Date of issue Sheet
1/1
Large sealing cone (16-21mm) – ZM000174
H
Dept. Technical reference Created by Approved by
Fredrik Ostrem 01.08.2017
Document type Document status
x 1
Title DWG No.
Untitled
Rev. Date of issue Sheet
1/1
Blanking plug for sealing cone – ZM000173
I
Dept. Technical reference Created by Approved by
Fredrik Ostrem 01.08.2017
Document type Document status
x 4
Title DWG No.
ZM000173-2
Rev. Date of issue Sheet
1/1
J Locking nuts - ZB100049
x 1
Adhesive sticker to protect connections
K
x 1
7 mm
7 mm-long socket
spanner
x 1
8 mm
8 mm-long socket
spanner
9
EN