Description Of The Zaptec Pro System - ZAPTEC Pro Installationshandbuch

2. Description of the ZAPTEC Pro system

4G
Future-proof and intelligent charging solution
Combines power electronics, built-in software which runs on
the charging station and a cloud solution for configuration,
monitoring and advanced algorithms. The solution is future-
proof with software updates from the cloud solution to the
charging station.
199 kWh
Fair use through RFID or ZAPTEC App
A built-in electricity meter gives accurate consumption
readings, and a space in a shared garage or parking space
can be allocated. Each user only pays for their own power
consumption.
*With three-phase, TN connection time 24 hours and average charging usage.
4G
4G
kW
Use all available capacity
The power is shared dynamically across all the charging
stations. Enables over 100 electric vehicles to be charged in
one day, via a single 63A* fuse. Charge at up to 22kW on
all charging stations.
3
2 3 kr
4
4G
4G
Unique scope for scaling with a single circuit
and power cable
Communication between the charging stations and the cloud
solution passes through the same power cable. This shared
infrastructure makes it possible to start with a few charging
stations and expand the system as and when necessary.
Scaling an existing installation will therefore not require any
extra work or investment in the fuse box.
Safety in accordance with the highest standards
Type 2 port which copes with high loads over
time, integrated fuses, electronic earth fault protection and
temperature sensors are built into the charging station. This
means safety for both the user and the power grid.
EN
4G
5