ZAPTEC Pro Installationshandbuch Seite 8

Add charging stations to the installation
After you have created the installation in ZAPTEC Portal, create circuits in accordance
with the electrical installation at the location. The charging stations must then be added
to the associated circuits.
Fill in the serial number (ZPRxxxxxx) and the name of each charging station. The name
should be the charging station's owner, apartment number, parking space number or
some other physical identification for the exact location of the charging station. The
location of the serial number is shown in the illustration. Charging stations illuminate
green when they are online.
The installation in the ZAPTEC Portal must represent the physical installation at the location. The ZAPTEC Portal
i
installation is a virtual installation in order to balance load and phase algorithms in the charging system.
8
Serial number, e.g.
ZPR123456