Intended Use; Description; Scope Of Delivery; Technical Design - SATA SATAjet 1500 B RP Betriebsanleitung

Operating Manual SATAjet 1500 B RP/HVLP

3. Intended Use

The paint spray gun is intended for the application of paint and varnish as
well as other suitable, fluid materials on suitable substrates.

4. Description

The compressed air required for painting is fed to the compressed air
connection. Squeezing the trigger as far as the first pressure point ac-
tivates pre-air control. When the trigger is squeezed further, the paint
needle is pulled out of the paint nozzle. The spraying medium then flows
unpressurized out of the paint nozzle and is atomized by the compressed
air flowing from the air nozzle.

5. Scope of Delivery

■ Paint spray gun with RP/HVLP nozzle set and gravity flow cup
■ Tool kit
■ CCS clips
■ Operating Instructions
Alternative model
■ Gravity flow cups made of PVC or aluminum with different capacities
After unpacking check whether:
■ Paint spray gun damaged
■ Complete scope of delivery

6. Technical Design

6.1. Paint spray gun
Anti-drip device
[1-1]
[1-2] Round/flat fan control
[1-3] Material flow control
Counter nut for material
[1-4]
flow control
Air micrometer (air flow
[1-5]
control)
[1-6] Air micrometer (air flow
control) locking screw
[1-7] Air piston (not visible)
Compressed air connection,
[1-8]
G ¼ (male thread)
ColorCode-System (CCS)
[1-9]
[1-10] Spray gun handle
[1-11] Trigger
[1-12] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-13] Spray gun connection with
QCC
[1-14] Gravity flow cup connection
with QCC
[1-15] Paint strainer (not visible)
[1-16] Gravity flow cup
[1-17] Gravity flow cup lid
US
523