Warranty And Liability - SATA SATAjet 1500 B RP Betriebsanleitung

Operating Manual SATAjet 1500 B RP/HVLP
EN
1.4. Accessories, spare and wear parts
Always only use original SATA accessories, spare parts and wear parts.
Accessories not supplied by SATA have not been tested and approved.
SATA assumes no liability for damage caused by the use of non-approved
spare parts, accessories and wear parts.

1.5. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff is employed.
■ When no personal protection equipment is worn.
■ Failure to use original accessories, spare parts and wear parts
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Assembly and disassembly
■ Clean the cover plate with pointed, sharp-edged or abrasive objects
1.6. Applicable directives, regulations and standards
Directive 2014/34/EU
Equipment and protective systems intended for use in potentially explo-
sive atmospheres (ATEX)
Directive 2006/42/EC
Machinery directive
DIN EN 1127-1:2011 Part 1
Explosive atmospheres Part 1: Basic concepts and methodology
EN ISO 80079-36:2016
Non-electrical equipment for use in potentially explosive atmospheres
Part 1: Basic method and requirements
EN ISO 12100:2011
Safety of machinery, general requirements
EN 1953:2013
Atomising and spraying equipment for coating materials – Safety require-
ments
124