Corrective Action - SATA SATAjet 1500 B RP Betriebsanleitung

Operating Manual SATAjet 1500 B RP/HVLP
Malfunction
Uneven spray jet (pul-
sating/sputtering) or
air bubbles in gravity
flow cup.
Air bubbles in gravity
flow cup.
Spray pattern too
small, slanted,
one-sided or split.
Round/flat fan control
not working – control
can be turned.
Cause
Paint nozzle not se-
cured tightly.
Damaged or soiled air
distribution ring.
Air nozzle loose.
Space between air
nozzle and paint noz-
zle ("air circuit") dirty.
Nozzle set dirty.
Nozzle set damaged.
Not enough spray
medium in gravity flow
cup.
Paint needle gasket
defective.
Bore holes in air noz-
zle clogged with paint.
Paint nozzle tip (paint
nozzle in) damaged.
Air distribution ring
positioned incorrectly
(pin not in bore hole)
or damaged.

Corrective action

Tighten paint nozzle
using universal wrench.
Replace air distribution
ring (see 9.2).
Tighten air nozzle by
hand.
Clean air circuit. Read
and follow cleaning
instructions (see 10).
Clean nozzle set. Read
and follow cleaning
instructions (see 10).
Replace nozzle set
(see 9.1).
Fill gravity flow cup
(see 8.2).
Replace paint nozzle
packing (see 9.3).
Clean air nozzle. Read
and follow cleaning
instructions (see 10).
Check paint nozzle tip
for damage and replace
nozzle set if necessary
(see 9.1).
Replace air distribution
ring (see 9.2).
US
533