Safety Instructions; Requirements For Personnel - SATA SATAjet 1500 B RP Betriebsanleitung

Operating Manual SATAjet 1500 B RP/HVLP
Atomizing and spraying equipment for coating materials – Safety require-
ments
DIN 31000:2011
"General principles for the safe design of products"

2. Safety Instructions

Read and observe all of the instructions below. Failure to observe or in-
correct observance can lead to malfunctions and severe injury.

2.1. Requirements for personnel

This paint spray gun is intended for use only by skilled personnel with
appropriate training who have read and understood these operating in-
structions completely. Use of paint spray guns by individuals with impaired
reactions as a result of dugs, alcohol, medications or for other reasons is
prohibited.
2.2. Personal Protection Equipment
When using, cleaning and maintaining the paint spray gun, always wear
approved respiratory protection, eye protection and ear protection as well
as suitable protective gloves, work clothing and protective shoes.
2.3. Use In Explosive Areas
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
Danger!
Risk of death from exploding paint spray gun
Use of the paint spray gun in explosive atmospheres classified as Ex
Zone 0 can result in an explosion.
→ Never use the paint spray gun in explosive atmospheres classified as
Ex Zone 0.
2.4. Safety Instructions
Technical condition
■ Never operate the paint spray gun if damaged or if parts are missing.
■ If damaged, immediately discontinue using the paint spray gun, discon-
nect it from the compressed air circuit and bleed completely.
■ Never alter or make technical modifications to the paint spray gun.
■ Before each use, check the paint spray gun and all connected com-
ponents for damage and ensure they are securely attached. Repair if
necessary.
US
521