Mowing
1) Remove the lockpin (E, Fig. 31) to release the oscillating
system.
2) Adjust the tensioning of the spring so that (F, Fig. 31-32),
when the mower is lifted, it does not sideslip at the left due to
the weight of the drive unit.
WARNING: while the machinery is being transported by road, use
the lockpin (E, Fig. 33) to block the oscillating system in a
horizontal position, securing it by means of appropriate safety
devices (pins, split-pins, etc.).
3.8 EXTENSIONS FOR WINDROWERS WITH SIDE
PLATES (optional)
Upon request, additional extensions can be supplied to reduce
the width of the windrows (G, Fig. 34).
cod. G19503211
USE AND MAINTENANCE
Fig. 31
F
Fig. 33
Fig. 34
g
F
E
G
ENGLISH
E
Fig. 32
G
41