Oscillating System - Gaspardo F Plus Gebrauch Und Wartung

ENGLISH

3.7 OSCILLATING SYSTEM

(Accessory for models F205 - F235)
On request, for the F205 and F235 models only, an oscillating
system can be supplied which enables the equipment to follow
the lie of the land perfectly. In fact, it is ideal for work on hilly land
and steep slopes.
Assembling the mower to the frame
1) Remove the first and second points of the equipment (Fig.
27);
2) Fit the oscillating system on the mower frame (Fig. 28),
securing it with the pins provided;
4) Fasten the tie-rod (B Fig. 20) to the mower frame and attach
the spring (C).
3) Change the standard version the configuration of first and
second point (A, Fig. 29) to version with the oscillating system
(B, Fig. 29).
ATTENTION: remove the lockpin (C, Fig. 29)
4) Fit the first and second points on the frame the oscillating
system (Fig. 30).
5) Hook up the mower, following the instructions provided in
chapter 3.0.
40
USE AND MAINTENANCE
Fig. 27
Fig. 28
A
Fig. 29
Fig. 30
g
C
B
cod. G19503211