Ec Declaration Of Conformity - Torqeedo DEEP BLUE i Originalbetriebsanleitung

DE EN
14

EC Declaration of Conformity

For the products listed below
3301-00-Deep Blue 80i 1800
3302-00-Deep Blue 80i 1400
We hereby state that they fulfil the principal protection requirements which are specified in the following directives:
Directive
■
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility (recast)
Applicable standards
■ EN 61000-6-2:2005 - Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments (IEC 61000-6-2:2005)
■ EN61000-6-3:2007+A1:2011 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial envi-
ronments (IEC 61000-6-3:2006 + A1:2010)
Directive
■
DIRECTIVE 2014/35/EUOF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to
the making available on the market of electrical equipment designed for use within certain voltage limits
I N S T A L L A T I O N D E C L A R A T I O N
In addition, the manufacturer states that the product designated above is an incomplete machine and therefore as per article 13 of DIRECTIVE 2006/42/EC OF THE EURO-
PEAN PARLIAMENT AND OF THE COUNCIL OF 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) - for short: Machinery directive - it is a machine which is
not independently operational, and for this reason does not yet fully comply with the applicable provisions of the Machinery directive.
The incomplete machine complies with the essential health and safety requirements of the Machinery directive up to the interfaces described in the technical documentation.
For inclusion in a machine or for the manufacture of an independently operational machine, the details in the installation instructions must be complied with. Commission-
ing is forbidden until it has been determined that the machine into which this assembly is to be combined is functional, and that it complies with the protection requirements
of the Machinery directive. As per Machinery directive, annex II part 1 section B, the following basic requirements were assessed as being relevant for the incomplete ma-
chine, and are hereby deemed to be complied with:
page 88 / 92
All manuals and user guides at all-guides.com
3303-00-Deep Blue 40i 1800
3304-00-Deep Blue 40i 1400
EC Declaration of Conformity