Setup menu: level 2
General
The Eln (characteristic selection), r (welding circuit resistance), L (welding circuit inductivity
display) and ASt (anti-stick) functions are located in a second menu level.
Changing to the second menu level (2nd)
1
2
3
4
The power source is now in the second menu level (2nd) of the Setup menu. The Eln func-
tion (characteristic selection) is displayed.
Changing weld-
1
ing parameters
2
Exiting the Setup
menu
Level 2 Setup menu
Select the "2nd" parameter as described in the section "Setup menu: level 1"
Press and hold the Setup / Store (7) button
Press the Process button (3)
Release the Setup / Store (7) button
Use the Process button (3) to select the desired parameter
Use the adjusting dial (1) to alter the value of this parameter
Press the Setup / Store button (7)
1
IMPORTANT! Any alterations are saved by
exiting the second menu level (2nd).
A complete list of parameters for the "Setup
menu: level 2" can be found in the section
headed "2nd parameter".
93