Tr 1000 / Tr 1100 Remote Control; Tp 08 Remote Control - Fronius TransPocket 4000 CEL Bedienungsanleitung

(3)
(4)
IMPORTANT! Parameters which can be adjusted on the remote control cannot be altered
on the power source. These parameters can only be altered on the remote control.
TR 1000 / TR 1100
remote control
TR 1000 remote control
TR 1000 / TR 1100 operating concept
TP 08 remote con-
System requirements
trol -
76
HotStart adjuster
Manual metal arc welding ... influences the welding current during the ignition
phase
0 no influence
10 100% increase in the welding current during the ignition phase
Arc-force dynamic adjuster
Manual metal arc welding ... for influencing the short-circuiting amperage at the in-
stant of droplet transfer
0 soft, low-spatter arc
100 harder, more stable arc
(2) (1)
(3)
Software version 2.81.1
TR 1100 remote control
(1)
(2) (1)
(2)
(3)
Parameter display button(s)
For selecting the parameter to be
displayed (welding current, etc.)
Parameter setting buttons(s)
For changing the selected parame-
ter
Welding current parameter