Tr 4000 Remote Control - Fronius TransPocket 4000 CEL Bedienungsanleitung

(5)
TR 3000 remote control - view from the right
(7)
IMPORTANT! Parameters which can be adjusted on the remote control cannot be altered
on the power source. These parameters can only be altered on the remote control.
TR 4000 remote
control

TR 4000 remote control

Welding current range selector switch
For selecting the welding current range that can be set using the welding current
adjuster (3)
- min - 150 A:
0 minimum welding current
10 welding current is 150 A
100 A - max:
-
0 welding current is 100 A
10 maximum welding current
(6)
Changeover switch for polarity reverser
For controlling the polarity reverser (option)
(+) Positive welding potential on the (+) current socket
(-) Negative welding potential on the (-) current socket
(6) Arc-force dynamic adjuster
Manual metal arc welding ... for in-
fluencing the short-circuiting ampe-
rage at the instant of droplet
transfer
0 soft, low-spatter arc
100 harder, more stable arc
(7)
(1) Parameter switchover button
For selecting and displaying the
welding voltage and welding cur-
(1)
rent parameters on the digital dis-
(2)
play
(3)
When changing a parameter, the
(4)
parameter value appears briefly on
the digital display of the remote
control so that it can be verified.
(2) Welding current adjuster
For selecting the welding current
75