Control elements and connections
General
The functions are all arranged in a logical way on the control panel. The various welding
parameters can easily be selected with the press of a button and can just as easily be
-
-
As a result of software updates, you may find that your device has certain functions that
are not described in these Operating Instructions, or vice versa. Certain illustrations may
also differ slightly from the actual controls on your device, but these controls function in ex-
actly the same way.
Description of the
control panel
Danger from incorrect operation.
This can result in serious injury and damage to property.
► Do not use the functions described here until you have read and completely under-
► Do not use the functions described here until you have fully read and understood all of
Control panel
(1)
changed using the adjusting dial
shown on the display during welding
WARNING!
stood these Operating Instructions.
the Operating Instructions for the system components, in particular the safety rules.
(2)
(6)
(4)
(
) 9
(7)
Adjusting dial
for changing parameters. If the indicator on the adjusting dial is lit up, then the se-
lected parameter is one that can be altered.
(11)(10)
(12)
(5)
(3)
(3)
(1)
(
) 8
71