Scope Of Delivery - Ottobock 7E9 Gebrauchsanweisung

CAUTION
Overheating of the hydraulics due to excessive strain
Burns, injuries caused by falling due to changes in functionality and damage to prosthesis com­
ponents
► Do not touch overheated prosthesis components.
► In case of changes in functionality, stop all activities and allow the overheated prosthesis
components to cool down.
► In case of changes in functionality, reduce strain on the prosthesis component in order to
allow cooling.
► In case of overheating or changes in functionality, have the prosthesis component inspected
for damage by a service centre authorised by the manufacturer.
Inform the patient.
►
NOTICE
Mechanical damage to the product
Damage due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged check it for proper function and readiness for use.
In case of changes in or loss of functionality, do not continue using the product (see "Signs
►
of changes in or loss of functionality during use" in this section).
► Take suitable measures if required (e. g. repair, replacement, inspection by the manufac­
turer's customer service etc.).
Inform the patient.
►
Signs of changes in or loss of functionality during use
Noticeable functional changes may include poor response, incomplete extension, diminished
swing phase control or stance phase stability, abnormal noises, etc.

4 Scope of Delivery

The scope of delivery for the product is shown on page 2 (Figure 1).
The following single components and accessories are included in the scope of delivery in the spe­
cified quantities and are available for reordering as single components ( ), single components
with minimum order quantities ( ) or single-component packs ( ):
Fig. No.
– –
1 1
1 2
1 3
1 4
1 5
1 4
1 5
1 6
1 7
– –
2 1
2 2
Quantity Designation
1 Instructions for Use
– 1 Hip Joint
1 Support Plate
1 Lamination Plate (up to 125 kg)
2 Oval Head Screw (up to 125 kg)
2 Flat Head Screw (up to 125 kg)
2 Flat Head Screw (up to 100 kg)
2 Flat Head Screw (up to 100 kg)
1 Hexagon Screwdriver
1 Lamination Aid
1 T40 Bit
1 Lamination Plate (up to 100 kg)
1 Bottom Plate (up to 100 kg)
7E9 Hip Joint
Reference number
647G774
–
4G576
7Z53=1-M10
501S72=M10x25
501S72=M10x30
501F9=M8x25
501F9=M8x30
710H10=2x3
7Z63
709Z11
7Z53
4G420=S
25