Disinfection; Maintenance; Maintenance Intervals; Maintenance Tasks - Ottobock Lisa Gebrauchsanweisung

Maintenance

Additional cleaning instructions
• Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
• Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).
• Do not iron or bleach the belts.

6.7.3 Disinfection

1) Thoroughly clean the pads before disinfecting.
2) Wipe all parts of the product with a disinfectant.
Important information about disinfecting
• Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
• Thoroughly clean the padding and handles before disinfecting.
7 Maintenance
• The function of the product should be checked before each use.
• The product should not be used if defects are noted. This applies in particular in case of instability of the
product or altered driving characteristics as well as problems with the user's seating position or the stability of
the seat. Inform the qualified personnel promptly for the rectification of defects.
• This also applies if loose, worn, bent or damaged components, cracks in the frame or broken frame compon­
ents are identified.
• Some maintenance tasks can be carried out to a certain extent by the user at home (see the sections "Mainten­
ance intervals" and "Maintenance tasks").
The manufacturer also recommends regular maintenance every 12 months by authorised, qualified personnel.
•
• Failure to maintain the product can lead to serious or life-threatening injury to the user of the product.
• Service and repairs may only be carried out by authorised, qualified personnel or the manufacturer. This will
ensure that only Ottobock spare parts are used for repairs.

7.1 Maintenance intervals

The functions described below must be checked by the user or an attendant at the specified intervals:
Inspection task
Functional test of the wheel locks
Check of all bolted connections
Wear and tear of the folding device
Locking mechanism of the foot support
Check belts for wear
Ensure padding is in good condition
Visual inspection of wear and tear parts (e.g., tyres,
bearings)
Soiling of bearings
Check the legibility of all labels and markings on the
product

7.2 Maintenance tasks

To ensure smooth operation at all times, users or attendants with some technical skills can maintain some parts of
the product:
• Hair and dirt particles generally accumulate between the caster wheel and fork. This can restrict the caster
wheels from rotating smoothly. For this purpose, lubricate the caster axle between the caster wheel and caster
fork with a few drops of thin, resin-free oil (sewing machine oil).
CAUTION: Do not remove the caster wheel yourself. If the caster wheel continues to not rotate
smoothly, please contact the qualified personnel.
• If the rehab buggy gets wet, it should be rubbed dry again.
• Screw connections must be periodically checked for tightness, especially during the initial period of use or
after making adjustments to the rehab buggy. If a screw connection loosens repeatedly, contact the specialist
dealer promptly.
70
Before each use
X
Monthly Quarterly
X
X
X
X
X
X
X
X
Lisa