Discontinuation, Disassembly And Waste Disposal - Galvamet KompaKOne Bedienungsanleitung

EN
VII

DISCONTINUATION, DISASSEMBLY AND WASTE DISPOSAL

DISCONTINUATION
Discontinuation means the definitive stop of the operation and the disassembly or

the appliance.
After discontinuation the appliance can be installed on another furniture, privately

resold or disposed of.
CAUTION!
For discontinuation it is necessary to switch the appliance off and
disconnect the power (fig. 1-2 chapter WARNINGS).
CAUTION!
Electrical disconnection and must be undertaken only by qualified
service staff.
DISASSEMBLY
Disassembly requires that the appliance is accessible for disassembly and has been

disconnected from the power supply.
To do so, you need:
Loose screws and fixing brackets

Remove any silicone seals

Disconnect the motor and the channel from the hob

Take the top of the hob out.

WASTE DISPOSAL



This appliance is marked in accordance with the European Directive
2012/19/EC,
Waste Electrical and Electronic Equipment (WEEE).
The symbol on the product or on the packaging indicates that the
product should not be considered as a normal household waste, but
must be taken to the appropriate collection point for the recycling of
electrical and electronic equipment.
By appropriately dispose of this product, it helps to avoid potential
negative consequences for the environment and health that may result
from inappropriate disposal of the product.
For more detailed information on recycling this product, contact your
local office, local waste disposal service, or the shop where you
purchased the product.
75