Power Management System; Safety Switch Off; Overheating Protection - Galvamet KompaKOne Bedienungsanleitung

EN

POWER MANAGEMENT SYSTEM

The Power Management system distributes power between the available cooking zones arranged in pairs
(Fig.5.3), providing maximum power at a cooking zone and automatically reducing the power available to
the other one. The display of the second cooking zone alternates, for a few seconds, the power of cooking
chosen and the limited power.
Caution! In certain circumstances, the Extra powerful setting
function may turn off automatically to protect the electronic
components inside the hob.

SAFETY SWITCH OFF

Maximum continuous operation of a particular cooking zone is limited, and the duration is displayed in the
above chart. When the cooking zone is turned off by the safety mechanism, the indicator displays
in case there is any remaining heat left.
Level
1
2
3
4
5
6
7
8
9

OVERHEATING PROTECTION

Induction hotplate is also fitted with safety device against overheating which protects electronic parts from
damages. This device operates on several levels. When temperature of the hotplate excessively rises, it
switches on two-stage fan. If this is not enough, extra powerful heating is deactivated, and finally the safety
device either reduces the heating power of certain hotplates or turns them off completely. When the
hotplate cools off, the full power of hotplate is again available.
Time in hours before safety
switch off
8
6
5
5
4
1,5
1,5
1,5
1,5
Fig. 5.3
, or
58