Cleaning Function - Galvamet KompaKOne Bedienungsanleitung

EN

CLEANING FUNCTION

In order to allow the cleaning of the hob the cleaning function is inhibiting the touch
controls.
The function is activated by pressing T2 key for 5sec.
For a minute, the touch control will be inhibited.
During this period the display will show "C". After one minute the device will normally
work
ADJUSTABLE AND DELAYED SELF-SWITCHING OFF
By pressing T4 adjustable and delayed self-switching off of the aspiration can be activated.
The display shows "D":
With the hood in operation, select the desired speed than press T4 to activate the delayed
self – switching off.
The display will show "1" blinking followed by a point, where the point stands for
programming phase.
By pressing T2 and T3 respectively the self-switching off time could be adjusted from 1 to
4:
1= 5 minutes
2= 10 minutes
3= 15 minutes
4= 20 minutes
Press again T4 to confirm the programming.
During self-switching off operation, you can change the set speed by using the T2 and T3
keys and manually switch off the hood by pressing the T1 key.
You can also change the self-switching off time once set by pressing the T4 key again and
resetting the new time: the count will resume from 0.
With the self-switching off activated the display will show cyclically for 5 seconds the set
speed with fix light and for the following 5 seconds the self-switching off setting with
blinking light.
If you choose the intensive speed, after 5min the hood will go to the 3rd speed and the
self-timer will run at the 3rd speed.
With booster set the aspiration will automatically switch to the 3rd speed after 5 minutes,
self- switching off will take place at the 3rd speed.
66