Use; Basic Functions; Adjusting The Frame Height - Ottobock Walkstar Gebrauchsanweisung

CAUTION
Unprotected tripod springs
Unintentional adjustment of the frame, risk of tipping
► Make sure that the tripod springs are engaged after adjustment and sit firmly in the bores.
INFORMATION
On the topic of disassembly/transport: see Page 34.
1) Lay the product on the floor.
2) Grasp the product close to the middle of the front frame (see fig. 3) and unfold the frame.
3) Allow the tripod springs to engage with an audible click in the bores of the crossbraces (see fig. 4, item 1) on
both sides.
3

7 Use

7.1 Basic functions

7.1.1 Adjusting the frame height

CAUTION
Unprotected tripod springs
Unintentional adjustment of the frame, risk of tipping
► Make sure that the tripod springs are engaged after adjustment and sit firmly in the bores.
CAUTION
Frame height adjusted unevenly
Risk of tipping
► Set all 4 wheels to the same height.
CAUTION
Missing covers on open bores in the frame (sizes 1/2 and 1)
Pinching, crushing, injury of the fingers
► Insert the supplied plugs into open bores.
The frame height can be adjusted as needed by changing the wheel height:
1) Press in the tripod spring on the telescoping tube (see fig. 5).
2) Set the desired height in the area of the bores.
3) Allow the tripod spring to engage in the bore with an audible click.
4) For sizes 1/2 and 1: Insert the supplied plugs in the open bores in the frame (see fig. 6, item 1).
Walkstar
4
Use
29