Pelvic Supports - Ottobock Walkstar Gebrauchsanweisung

Use
b) Adjusting the push handle depth
1) Loosen both screws underneath the channel forearm support (see fig. 11, item 1).
2) Move the push handle to the desired position.
3) Retighten both screws (see fig. 11, item 1).
c) Adjusting the channel forearm support depth
1) Remove the pad from the channel forearm support and loosen the two screws (see fig. 12, item 1).
2) Bring the channel forearm support into the desired position.
3) Retighten both screws (see fig. 12, item 1).
4) Reattach the pad on the channel forearm support.
10
12

7.2.2 Pelvic supports

The pelvic support offers the user lateral support in the thigh and pelvic area.
1) Loosen the mounting screws (see fig. 13).
2) Adjust the width and angle of the pelvic support.
3) Tighten the mounting screws (see fig. 13).
13
32
11
Walkstar