Bosch EPS 708 Montageanleitung Seite 33

10. After alignment, secure the feet with the lock nuts.
11. Remove the bolt (refer to Fig. 4, Pos. 2) for securing
the high-pressure rail (Pos. 1) during transportation.
Fig. 4: High-pressure rail
4.3 Removing covers
!
Re-connect all the protective conductors removed
on attaching the covers.
1. Remove the covers (Pos. 1, Pos. 2 and Pos. 3) on
the front of the EPS 708. If necessary, remove any
protective conductors from the cover.
Fig. 5: Front view
Robert Bosch GmbH
1
2
Commissioning | EPS 708 | 33
2. Remove the covers (Pos. 1, Pos. 2, Pos. 3 and
Pos. 4) on the back of the EPS 708.
Fig. 6: Rear view
en
|
1 689 978 559 2017-12-08