Menu Level 1: Set Temperature - Dometic Coolair Rt780 Einbauanleitungen

CoolAir RT780
7.2

Menu level 1: Set temperature

The unit always starts with a defined value for the room temperature. This
parameter can be configured between 17 and 30 °C (62 and 86 °F).
➤ Start configuration mode (chapter "Starting and ending configuration
mode" on page 20).
✓ The first digit of the display shows the menu level and the second and
third show the parameter which can be set.
➤ Press the
➤ Use the + and – buttons to select the target value (in °C) at which the
unit should start operation.
✓ The digits in the display flash until the parameter you entered is
confirmed.
➤ Press the
✓ The set value is saved and is then used when the unit is restarted.
✓ You are now in menu level 1 again and can use the + and – buttons to
switch between menu levels.
EN
button to change the parameters.
button to confirm your entry.
Configuration of unit software
21