Fastening The Cover Frame - Dometic CoolAir RT780 Einbauanleitungen

CoolAir RT780
➤ Trim the longer connection cable from the fuse holder if necessary and
fit a suitable ring terminal.
➤ Connect the longer connection cable from the fuse holder with the ring
terminal directly to the positive terminal of the battery.
6.7

Fastening the cover frame

A
NOTICE!
Screw the screws in carefully order not to damage the cover frame.
➤ Remove the inner part from the original sunroof cover frame.
➤ Glue the self-adhesive buffer supplied to the original cover frame as
shown in fig. 6 1, page 5. The buffer acts as protection against
rattling.
fig. 7, page 5
➤ Screw the inner part supplied (7) in the original cover frame (8).
Use the original screws for this (5) along with the washers supplied
M3.5 (6).
➤ Screw the cover frame (7 and 8) to the cab roof using the four original
screws.
EN
Installation
19