Yamaha RXV-1700 Bedienungsanleitung Seite 95

■ Zone set
F)ZONE SET
F)ZONE SET
. ZONE2 VOL;;;;VAR
ZONE3 VOL;;;;VAR
ZONE2 AMP;;;;EXT
ZONE3 AMP;;;;EXT
[ ]/[ ]:Up/Down
p [
[ ]/[ ]:Adjust
Zone 2 volume ZONE2 VOL
Zone 3 volume ZONE3 VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT or ZONE 3 OUTPUT
jacks.
Choices: VAR, FIX
• Select "VAR" to adjust the ZONE 2 OUTPUT or
ZONE 3 OUTPUT volume simultaneously with
VOLUME +/– on the remote control.
• Select "FIX" to fix the ZONE 2 OUTPUT or ZONE 3
OUTPUT volume level to a standard line level.
Zone 2 amplifier ZONE2 AMP
Zone 3 amplifier ZONE3 AMP
Use to select how the ZONE 2 and/or ZONE 3 speakers
are amplified.
Choices: EXT, [SP1], [SP2], BOTH
• Select "EXT" if you want to connect your Zone 2 or
Zone 3 speakers through an external amplifier
connected to the ZONE 2 OUTPUT or ZONE 3
OUTPUT jacks on the rear panel of this unit.
• Select "[SP1]" to use the internal surround amplifier of
this unit when you want to connect your Zone 2 or
Zone 3 speakers directly to the SP1 speaker terminals
on the rear panel of this unit.
• Select "[SP2]" to use the internal surround amplifier of
this unit when you want to connect your Zone 2 or
Zone 3 speakers directly to the SP2 speaker terminals
on the rear panel of this unit.
• Select "BOTH" to use the internal surround and
surround back amplifiers of this unit when you want to
connect your Zone 2 or Zone 3 speakers directly to
both the SP1 and the SP2 speaker terminals on the rear
panel of this unit.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Notes
• When "BI-AMP" is set to "ON" in the "ADVANCED SETUP"
menu, "[SP1]", "[SP2]" and "BOTH" cannot be selected.
• When "BOTH" is selected for "ZONE2 AMP", only "EXT" can
be selected for "ZONE3 AMP".
• When "BOTH" is selected for "ZONE3 AMP", only "EXT" can
be selected for "ZONE2 AMP".
• When you set "ZONE2 AMP" or "ZONE3 AMP" to "[SP1]" or
"[SP2]" and the corresponding zone is turned on, no sound is
output from the surround back speakers.
• When you set "ZONE2 AMP" or "ZONE3 AMP" to "BOTH"
and the corresponding zone is turned on, no sound is output
from both the surround speakers and the surround back speakers
in the main zone.
• When both "ZONE2 AMP" and "ZONE3 AMP" are set to
"[SP1]" or "[SP2]" and Zone 2 and Zone 3 are turned on, no
sound is output from both the surround speakers and the
surround back speakers in the main zone.
• When you use internal amplifiers for Zone 2 or Zone 3, some
surround field programs may not work in the same way as when
you do not use the internal amplifiers for Zone 2 or Zone 3.
■ Dock set
G)DOCK SET
G)DOCK SET
. STANDBY CHRG;AUTO
) )
[ ]/[ ]:Adjust
[ENTER]:Return
STANDBY CHRG
Charge on standby
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode (see page 66).
Choices: AUTO, OFF
• Select "AUTO" to charge the battery of the stationed
iPod when this unit is turned on and in the standby
mode.
• Select "OFF" to charge the battery of the stationed
iPod only when this unit is turned on.
93
En