Playback; Basic Procedure - Yamaha RXV-1700 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für RXV-1700:

Inhaltsverzeichnis

Verfügbare Sprachen

PLAYBACK

Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD

encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may

damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the

sound output level of your CD player before you play back a CD encoded in DTS.

To play DTS-encoded CDs when using a digital audio connection, set "DECODER MODE" in "INPUT MENU" to "DTS" before the

playback (see page 89).

PRESET/TUNING

SILENT CINEMA

Turn on the video monitor connected to this

• See page 42 to display the input source information.

• You can display a gray background in the OSD when there

is no video signal being input by setting "GRAY BACK"

in "OPTION MENU" to "AUTO" (see page 90).

• You can change the display settings by using "SHORT

MESSAGE" parameter in "DISPLAY SET". See page 91

for details.

MAN'L/AUTO FM

ZONE CONTROLS

PTY SEEK START

Rotate the INPUT selector on the front panel

(or set the operation mode selector to AMP

and then press one of the input selector

buttons on the remote control) to select the

desired input source.

The name of the currently selected input source

appears in the front panel display and in the OSD for

a few seconds.

Available input sources

VCR 1 CBL/SAT

Remote control

Currently selected input

Inhaltsverzeichnis