Zone 2/Zone 3 Remote Control - Yamaha RXV-1700 Bedienungsanleitung

CONTROLS AND FUNCTIONS

Zone 2/Zone 3 remote control

This section describes the function of each control on the
Zone 2/Zone 3 remote control used to control the amplifier
functions of Zone 2 or Zone 3.
See the following pages for details about other controls
and functions.
• AM/FM tuning ........................................ see page 54
Note
Zone 2/Zone 3 remote control is supplied with U.S.A., Canada,
Australia, U.K., China, Asia and General models only.
TUNER CD
DTV CBL/SAT
1
VCR 1 DVR/VCR 2
PRESET
A/B/C/D/E
ID1
ID2
2
8
En
POWER
3
STANDBY
CD-R
4
PHONO
DVD
V-AUX/DOCK
5
VOLUME
6
MUTE
ZONE 2 ZONE 3
7
1 Input selector buttons
Select the desired input source of Zone 2 or Zone 3.
2 ID1/ID2 switch
Switches the remote control ID between ID1 and ID2
(see page 97).
3 POWER
Turns on Zone 2 or Zone 3.
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
4 STANDBY
Sets Zone 2 or Zone 3 to the standby mode.
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
5 VOLUME +/–
Increases or decreases the volume level of Zone 2 or
Zone 3.
6 MUTE
Mutes the sound of Zone 2 or Zone 3. Press again to
restore the audio output to the previous volume level.
7 ZONE 2/ZONE 3 switch
Switches between the operation mode of Zone 2 and that
of Zone 3.