Using Multi-Zone Configuration; Connecting The Zone 2 And Zone 3 Components - Yamaha RXV-1700 Bedienungsanleitung

USING MULTI-ZONE CONFIGURATION

This unit allows you to configure a multi-room audio system. The multi-zone configuration feature enables you to set this
unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You can
control this unit from the second or third room using the supplied remote control.
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third
room must be connected using the analog (AUDIO L/R) input jacks on this unit.

Connecting the Zone 2 and Zone 3 components

You need the following additional equipment to use the multi-room functions of this unit:
• An infrared signal receiver in the second and/or third room.
• An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second
and/or third room to the main room (to a CD player or DVD player, for example).
• An amplifier and speakers for the second and/or third room.
y
• You do not need an extra amplifier and speakers for the second and/or third room if you want to use the internal amplifiers of this unit.
• Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with
your nearest authorized YAMAHA dealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.
REMOTE
IN
Infrared signal
receiver
■ Using external amplifiers
To use an external amplifier in Zone 2 or Zone 3, connect the external amplifier to ZONE OUT terminals and select
"EXT" in "ZONE2 AMP" or "ZONE3 AMP" (see page 93).
MONITOR OUT
DVD player
(or other component)
VIDEO IN
AUDIO IN
Infrared emitter
Main room
(Main zone)
REMOTE OUT
Notes
• Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room when "ZONE2 VOL" or "ZONE3 VOL" are set to
"FIX" (see page 93).
• To avoid unexpected noise, DO NOT use the Zone 2/Zone 3 feature with CDs encoded in DTS.
106
En
USING MULTI-ZONE CONFIGURATION
REMOTE
IN
OUT
This unit
SP OUT
This unit
MAIN
SYSTEM
ZONE 3
ZONE 2
REMOTE
IN
OUT
YAMAHA
component
ZONE 2 AUDIO OUT
Amplifier
Remote control
Infrared signal
receiver
Second room
(Zone 2)
REMOTE IN
REMOTE
OUT
YAMAHA
component
ZONE 3 AUDIO OUT
Amplifier
Remote control
Infrared signal
receiver
Third room
(Zone 3)
REMOTE IN