If An Error Screen Appears - Yamaha RXV-1700 Bedienungsanleitung

AUTO SETUP
11
Press ENTER to return to the top
"RESULT:EXIT" display.
PRESET/CH
ENTER
A/B/C/D/E
12
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press l / h to
select "SET" or "CANCEL".
PRESET/CH
ENTER
A/B/C/D/E
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
13
Press ENTER to confirm your selection.
The top "SET MENU" display appears in the OSD.
PRESET/CH
ENTER
A/B/C/D/E
14
Press SET MENU to exit from "SET MENU".
SET MENU
SRCH MODE
Notes
• After you have completed the "AUTO SETUP" procedure, be
sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat. Keep it away
from direct sunlight and do not place it on top of this unit.
36
En
RESULT:EXIT
. RESULT
.
SP : 5/4/0.1
.
DIST: 4.50/ 6.10m
.
LVL : -9.0/ +6.5dB
[
SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
RESULT:EXIT
RESULT
.
SP : 5/4/0.1
.
DIST: 4.50/ 6.10m
.
LVL : -9.0/ +6.5dB
[
.
SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
. ;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
MENU

■ If an error screen appears

Press k / n / l / h to select "RETRY" or "EXIT"
and then press ENTER.
The following display is an example where "E-9:USER
CANCEL" appears in the OSD.
ERROR
E-9:USER CANCEL
.
Don't operate
any function.
[
.
RETRY
[p]/[[]:Up/Down
[ENTER]:Enter
Choices: RETRY, EXIT
• Select "RETRY" to retry the "AUTO SETUP"
procedure.
• Select "EXIT" to exit from the "AUTO SETUP"
procedure.
EXIT