Front Power Lift; Front Mounting Frames; View Of The Side; View Of The Rear - Kärcher MIC 50 Handbuch

6.1.1 Front power lift

3-point or 4-point mounts (option) can be fitted to the front
power lift. The attachments can be fastened to these
mounts.
Certain attachments can be directly attached to the front
power lift.
For fitting the attachments, see chapter 9.3 Front mounting
options.

6.1.2 Front mounting frames

Certain attachments can be attached directly to the mount-
ing frame for attachments.
For fitting the attachments, see chapter 9.3 Front mounting
options.
6.2

View of the side

Transport lock articulated joint
1
Rear wheel
2
Side cover lock
3
Hydraulic oil level display
4
Cabin doors, lockable
5
Driver cabin dust filter
6
Front wheel
7
Diesel particulate filter (only MIC 70)
8
6.3

View of the rear

Taillamp with flasher
1
Main switch
2
Hydraulic connections
3
58
Mounting frames for attachments
4
Tow bar
5
Trailer power socket
6
Hydraulic connections
7
Recesses, prepared for optional connections
8
Electrical PTO 6-pole connection *
9
Recess, prepared for optional reversing camera
10
Work light
11
Licence plate bracket
12
Tipping mechanism *
13
* optional

6.3.1 Rear mounting frames

Counterweights and certain attachments can be attached
directly to the mounting frame for attachments.
For fitting the attachments, see chapter 9.5 Rear mounting
options.
6.4

Hydraulic and electrical connections

Definition of the term, hydraulic PTO
Power Take Off = hydraulic force output
Definition of the term, AUX
Auxiliary = auxiliary hydraulic valve
Definition of the term, electrical PTO
Power Take Off = electrical force output

6.4.1 Connections for MIC 50 front attachment

Note
Fit a dust cap to an unused connection to provide protec-
tion.
AUX 1+ (A - red)
1
AUX 1- (B - red)
2
AUX 2+ (A - blue)
3
AUX 2- (B - blue)
4
AUX 3+ (A - green)
5
AUX 3- (B - green)
6
Electrical PTO
7
Hydraulic PTO flow (40 litres/min)
8
Leakage oil
9
Hydraulic PTO return flow
10
Hydraulic PTO flow (80 litres/min)
11
Note
The hydraulic connections AUX are controlled using the
joystick.
Note
The hydraulic PTO is activated using the hydraulic PTO
selector switch in the operating console.
For a description of the selector switch, see chapter 6.11.2
Centre operating console for MIC 50.
English