Rear Operating Console For Mic 70; Front Power Lift Lowering Throttle; Attachment Release; Initial Startup - Kärcher MIC 50 Handbuch

Ignition lock
Engine off
1
Ignition on
2
Preheating
3
Start the engine
4

6.11.5Rear operating console for MIC 70

Rotary knob for front power lift lowering speed
1
Rotary knob for attachment release
2
Ignition lock
3
Additional socket-outlet, 12 V
4
Ignition lock
Engine off
1
Ignition on
2
Start the engine
3
68

6.11.6Front power lift lowering throttle

"Increase lowering speed" rotation direction
1
"Decrease lowering speed" rotation direction
2
Turning in rotation direction 2 all the way to the limit stop
locks the front power lift.
The lowering speed of the front power lift can be set using
the lowering speed rotary knob.
Note
The function is needed for transport journeys on public
roads in order to disable the front power lift and thus the
lowering of the attachments.

6.11.7Attachment release

Rotary knob for attachment release
1
Attachment release is used in order to move the load from
one attachment fitted on the front power lift towards the ve-
hicle's front axle.
Note
For a description of this, see chapter 8.5.2 Attachment re-
lease and vibration dampening (optional).
7

Initial startup

CAUTION
Read the operating instructions for attachments!
When using attachments or pulled devices and trailers pri-
or to initial startup, read the corresponding operating in-
structions and follow them.
Pay attention to permissible loads, see chapter .
English