General Power Tool Safety Instructions; Hazard Levels - Kärcher TLO 18-32 Battery Originalbetriebsanleitung

Contents
Safety instructions ...............................................
Intended use........................................................
Environmental protection.....................................
Accessories and spare parts ...............................
Scope of delivery .................................................
Symbols on the device ........................................
Description of the device .....................................
Initial startup ........................................................
Basic operation....................................................
Switch on the device ...........................................
Removing blockages ...........................................
Removing the battery pack..................................
Finishing operation ..............................................
Transport .............................................................
Storage................................................................
Care and service .................................................
Troubleshooting guide .........................................
Warranty ..............................................................
Technical data .....................................................
Vibration value.....................................................
EU Declaration of Conformity ..............................
Safety instructions
Read these safety instructions, these original
instructions, the safety instructions provided
with the battery pack and the original instruc-
tions supplied with battery pack/standard charg-
er before using the device for the first time. Act in
accordance with them. Keep the booklets for future ref-
erence or for future owners.
In addition to the notes in the operating instructions, you
also need to take into consideration the general safety
regulations and accident prevention guidelines applica-
ble by law.

Hazard levels

DANGER
●
Indication of an imminent threat of danger that will
lead to severe injuries or even death.
WARNING
●
Indication of a potentially dangerous situation that
may lead to severe injuries or even death.
CAUTION
●
Indication of a potentially dangerous situation that
may lead to minor injuries.
ATTENTION
●
Indication of a potentially dangerous situation that
may lead to damage to property.

General Power Tool Safety Instructions

WARNING
●
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1 Work area safety
12
a Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
12
b Do not operate power tools in explosive at-
14
mospheres, such as in the presence of flam-
14 mable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
15
c Keep children and bystanders away while op-
15
erating a power tool. Distractions can cause
15
you to lose control.
15
2 Electrical safety
15
a Power tool plugs must match the outlet. Nev-
15
er modify the plug in any way. Do not use any
15
adapter plugs with earthed (grounded) power
15 tools. Unmodified plugs and matching outlets will
reduce the risk of electric shock.
16
b Avoid body contact with earthed or grounded
16
surfaces such as pipes, radiators, ranges and
16
refrigerators. There is an increased risk of elec-
16
tric shock if your body is earthed or grounded.
16
c Do not expose power tools to rain or wet con-
16
ditions. Water entering a power tool will increase
17
the risk of electric shock.
17 d Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
17
tool. Keep cord away from heat, oil, sharp
17
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduc-
es the risk of electric shock.
3 Personal safety
a Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
b Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate condi-
tions will reduce personal injuries.
c Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
d Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g If devices are provided for the connection of
dust extraction and collection facilities, en-
sure these are connected and properly used.
English