Centre Operating Console For Mic 50 - Kärcher MIC 50 Handbuch

Travel direction selector switch
1
Indication for travel direction preselection "forwards"
2
Indication for travel direction preselection "reverse"
3
Not used
4
Double-acting hydraulic connection
5
AUX green
Double-acting hydraulic connection
6
Floating position for AUX red
Double-acting hydraulic connection
7
Floating position for AUX blue
AUX blue
8
Control lever
Depending on the activation of the switch for "AUX rear/at-
tachment frame with tipping mechanism", the control lever
is used for:
 Controlling the rear attachments
 Lifting and lowering the attachment frame with tipping
mechanism
Neutral position
1
Lowering and pressing down, the lever does not en-
2
gage
Lowered in floating position, the lever engages
3
Note
Attachment tracks the floor (e.g. brush)
Lifting, the lever does not engage
4
Forwards direction of travel
5
Control lever MDC variant
The control levers are used to control the front and rear at-
tachments.
66
Control lever for front linkage
1
Control lever for AUX red/blue
2
Control lever for AUX green/gray/purple
3

6.11.2Centre operating console for MIC 50

PTO on/off
1
Position 1: Switch on the PTO
Press the black knob and pull the button
PTO on/off
Position 0: Switch off the PTO
Press the button downwards.
Selector switch for hydraulic PTO
2
Tempomat
3
Differential lock
4
Electrical PTO, front
5
Electrical PTO, rear
6
Switchover for double-acting control hydraulics AUX
7
"rear/attachment frame with tipping function"
Main switch, floating position
8
Dump valve (quick-lowering for AUX rear)
9
Attachment release switch (optional)
10
Note
This switch is responsible both for vibration dampening
and for attachment release (both options at the same
time does not work)
English