Accelerator; Parking Brake; Mic 50 Brake Pedal; Mic 70 Brake Pedal - Kärcher MIC 50 Handbuch

Accelerator pedal forward/backward
1
Brake pedal
2
Steering wheel inclination adjustment pedal
3
Parking brake pedal
4
Locking/unlocking lever Parking brake
5

6.9.1 Accelerator

ATTENTION
Other than in a normal motorcar, releasing the accelerator
pedal abruptly reduces the speed.
The braking force applied when you release the accelera-
tor pedal is weaker in higher gears and stronger in lower
gears.
The braking force applied when you release the accelera-
tor pedal in transport mode is significantly weaker than in
working mode.
Pressing the accelerator pedal increases the engine
speed.
The accelerator pedal is sprung. Releasing the accelerator
pedal reduces the engine speed.
The hydrostatic drive brakes or stops the vehicle when the
accelerator pedal is released.

6.9.2 Parking brake

Parking brake for securing the parked vehicle.
Note
If the "Parking brake active" warning light in the display
lights up then the parking brake is engaged.

6.9.3 MIC 50 brake pedal

The brake pedal activates the braking system for the front
wheels.

6.9.4 MIC 70 brake pedal

The brake pedal activates the front and rear wheel braking
system.

6.9.5 Inching pedal

The inching pedal regulates the speed in WORKING
MODE and CREEPING MODE.
To decrease the travel speed, press the inching pedal.
Note
The inching pedal can also be used as a brake pedal; to do
so, step on the inching pedal to the floor.

6.10 Multi switch on the steering wheel

Steering wheel
1
Windscreen wiper
2
Position J: Intermittent operation
Position 0: Off
Position I: Normal
Position II: Fast
Windscreen washer fluid
3
Press to actuate
Horn
4
Press to actuate
Indicate right
5
Indicate left
6

6.11 Operating consoles

6.11.1Front operating console for MIC 50 / MIC 70

Joystick
1
All the front attachments are controlled with the joystick.
Control lever
2
The control lever is used to control the rear attach-
ments.
Preselection of operating programs
3
All the front attachments are controlled with the joystick.
The joystick can be moved in X direction and in Y direction.
 Moving in X direction (left and right) controls the con-
nected up attachments.
Moving in Y direction (front and back) lifts or lowers the
front device carrier to which the attachment is fastened.
 To activate / deactivate the floating position (AUX red or
blue), press the relevant button on the joystick.
English
Joystick
65